新闻中心
Home > News Center > Company News

What are the technical requirements of non-standard machining?
2024-01-21 18:29:29

Non-standard Machining is one of the commonly used parts in machinery. non-standard machining is an important part. It supports the transmission components and transmits torque. For us, the technical requirements and processing of shaft parts is a content about large machining. What exactly is it about? So look at the following.

The technical requirements of non-standard machining generally include the following aspects:

1. Accuracy of diameter and geometry

On the shaft, non-standard machining support journal and matching journal are important. The diameter accuracy is IT5 -- IT9, and the shape accuracy should be controlled within the diameter tolerance, which is higher than the diameter accuracy. Mutual position accuracy: if it is the general accuracy of the shaft, its radial circle runout, if with the journal support journal, generally take 0.01-0.03 mm, high precision shaft 0.001-0.005 mm.. If there is any special request, please indicate it.

2. Surface finish

Due to the machine precision, speed and other factors, the requirements for non-standard machining surface roughness are different. The surface roughness of the support journal is 0.16 -- 0.63 microns, and the surface roughness of the matching journal is 0.63 -- 2.5 microns

3. Spindle materials, blanks and heat treatment

In non-standard machining, the commonly used material is 45 steel. Through normalizing, annealing, tempering and quenching, certain strength, hardness, wear resistance and toughness can be obtained.

For shaft parts with higher rotational speed, alloy structural steel can be selected, because it will improve wear resistance and fatigue resistance after heat treatment.

The main shaft blank generally adopts forgings and round steel, which can reduce the cutting amount and improve the mechanical properties of materials.

 360截图20231229153451291.jpg


Comment

(0)
*Captcha:

Copyright ©  2020 Wuxi Aobote Machinery Manufacturing Co., Ltd. All Rights Reserve [Su ICP Bei No. 17034479]