Safety precautions for CNC machining

2024-01-21 17:08:05

Parts, refers to the machinery can not be detachable single parts, is the basic components of the machine, is also the basic unit in the process of mechanical manufacturing. The manufacturing process usually does not require Assembly. Such as shaft sleeve, bearing bush, nut, crankshaft, blade, gear, CAM, connecting rod body, connecting rod and so on. Non-standard parts simply means that there is no certain standard parts. Making custom parts is easier than making standard parts. It's not that complicated. We all know that in CNC lathe processing if improper operation will cause certain harm to the operator, so we must strictly abide by the rules of operation when using CNC lathe for non-standard parts processing to ensure safety, CNC Machining safety specific notes are as follows:

1. First of all, before the processing of non-standard parts, we must do a good job of preparatory work, carefully check whether their clothes meet the requirements of the work, must be strictly complied with.

2 Check whether the equipment is in line with the normal working standards, the voltage of the CNC lathe is stable, the jack must be triangular jack and the line has a ground wire, before the formal operation, the CNC lathe to carry out an empty running test, in the case of no exceptions to boot operation.

3. If there is an anomaly in CNC machining, we must wait for the machine to stop working completely before checking and troubleshooting.